HABOTEST AC/DC Digital Clamp Meter True-RMS Multimeter Anto-Ranging Multi Tester Current Clamp with Amp Volt Ohm Diode Capacitance Resistance Continuity NCV Temperature Duty Ratio VFD Tests | Electrical Equipment & Supplies

Description

This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC voltage, AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.
Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/DC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.
Note:
*MUST read the user manual carefully before use for safety.
*Battery not included.
Parameters:
Display: 6000 count
Clamp Opening Size: 40mm
Auto-off: approx. 15 minutes
Max. Voltage Between Terminals and Earth Ground: AC750V or DC 1000VRangeResolutionAccuracyDC Current (MAX current: 1000A)60A0.01A±(2.5%reading+8)600A0.1A1000A1AAC Current (MAX current: 1000A, True RMS)
Frequency range: 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz60A0.01A±(2.5%reading+8)
VFD: ±(5.0%reading+10)
INRUSH: ±(5.0%reading+10)600A0.1A1000A1ADC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V600mV0.1mV±(0.5%reading+5)6V0.001V60V0.01V600V0.1V1000V1V±(0.8%reading+5)AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency range: 40Hz~1kHz, True RMS600mV0.1mV±(0.8%reading+5)6V0.001V60V0.01V600V0.1V750V1V±(1.0%reading+5)VFD(750V)0.1V±(2.0%reading+5)Resistance
Overload protection: 250V600Ω0.1Ω±(1.0%reading+5)6kΩ0.001kΩ60kΩ0.01kΩ600kΩ0.1kΩ6MΩ0.001MΩ60MΩ0.01MΩDiodeIt displays the approximate forward voltage value of the diode.Forward DC current is about 1.5mA;
Reverse DC voltage is about 3V;
Overload protection: 250VContinuity
Overload protection: 250VCapacitance
Overload protection: 250V10nF0.001nF±(4.0%reading+5)100nF0.01nF1000nF0.1nF10μF0.001μF100μF0.01μF1000μF0.1μF10mF0.001mF100mF0.01mF±(5.0%reading+10)Frequency/Duty Ratio
Overload protection: 250V10Hz0.001Hz±(1.0%reading+3)100Hz0.01Hz1000Hz0.1Hz10kHz0.001kHz100kHz0.01kHz1000kHz0.1kHz10MHz0.001MHz±(3.0%reading+3)1~99%0.1%Temperature
*The below precision does not inlcude the error of thermocouple probe.℃1℃±3℃ (-20℃~0℃)±1.0% or ±2℃ (0℃~400℃)±2.0% (400℃~1000℃)℉1℉±6℉ (-4℉~32℉)±1.0% or 4℉ (32℉~752℉)±2.0% (752℉~1832℉)
Specifications:
Material: ABS
Color: Black and Red
Battery: 2pcs, 1.5V, AAA alkaline battery (batteries not included)
Item Size: 24*8*4.5cm / 9.44*3.14*1.77in
Item Weight: 311g / 10.97oz
Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in
Package Weight: 620g / 21.86oz
Packing List:
1 * Digital Clamp Meter
1 * Thermocouple
2 * Test Lead
1 * User Manual(English)