NOYAFA NF-8209S POE Wire Checker LCD Display Measure Length LAN Cable Cat5 Cat6 LAN Test Network Tool Scan Cable Wiremap Tester | Other Instruments

Description

NF-8209S is a new generation to offer digital and analog signaling all in one network toner and probe. It has three modes for options to track cable like digital mode, analog mode and PoE mode. That means it’s equipped with the most powerful cable location technologies for any work environment. Also, it includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.
Features:
Dual scan modes selectable: AC filter & Non AC filter.
Detect AC voltage presence (70V-1000V).
Test physical status for STP, UTP lan cable.
Measure cable length accurately , the range is 500m.
Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard).
Quallity verify the crimping crystal.
Specifications:
Material: ABS
Package Weight: 460g / 16.23oz
Package Size: 23 * 16.5 * 4.5cm / 9.06 * 6.50 * 1.77in
Emitter Parameters & Functions:
LCD Display: 128*64 dot-matrix with backlight
Power Supply: 3.7v 1400mAh lithium battery
Auto-off Time: 15min/30min/60min/OFF
Voltage Protection: DC48V, 5mA
Max. Working Current:
Size: 125 * 70 * 32mm / 4.92 * 2.76 * 1.26in
WIREMAP TEST:
Cable Type: CAT5, CAT6, (STP & UTP)
Test with Switch Directly: Yes
Max. Range: 600m
LENGTH TEST:
Cable Type: CAT5, CAT6, (STP & UTP)
Test Range: 2.5~500m
Accuracy: ±1.6m
Breakage Location: Yes
SCAN TEST:
Cable Type: CAT5, CAT6,(STP & UTP)
Max. Signal Voltage: 5V+/-1.0V p-p(audio file)
Frequency: 455KHz
Dual mode to scan cable：AC filter & Non AC filter
Max. Range: 600m (RJ45)/ 400m(RJ11)
POE TEST:
Test Range: DC5~60V standard / non-standard PoE switch
Power supply core/Jumper method：End jumper/middle jumper/8-pin power supply/unknown
PSE Type: Standard: IEEE 802.3af/at; Non standard
Receiver Parameters:
Sensitivity Adjustable: Yes
NCV：AC 70V~1000V 50/60Hz
Lamp: Yes
Wiremap：Yes
Battery Type: 3.7v 1400mAh lithium battery
Low Battery Warning: 3.5v+/-0.1v
Auto-off Time: 15min/30min/60min/OFF
Standby current：
Max. Working Current:
Charging method：DC 5V 1A Type-C
Operating temperature/humidity：32~122°F (0~50°C）/90% non-condensing
Size: 198* 50 * 28mm / 7.80 * 1.97 * 1.10in
Packing List:
1 * Emitter
1 * Receiver
1 * Earphone
1 * Charging line
3 * Cable adaptors
1 * Toolkit
1 * Manual(English)